Tuning Bar

Rated 4.50 out of 5 based on 2 customer ratings
(2 customer reviews)

$94.00

Description

Finding it hard to crank your Djembe or Duns?

Get some real tension with our custom designed Cranking Bars, made from reinforced alloy

Makes tightening your drum easy while protecting your hands from rope burn. Great for all size djembes and duns

Dimensions (L x W x H):  50cm x 4cm x 13cm

Find more here:

 

Additional information

Weight 1.5 kg
Dimensions 1 x 1 x 1 cm

2 reviews for Tuning Bar

  1. Rated 5 out of 5

    admin

    As Reviewed by Michi on DjembeFola

    “The bar is made of cleanly-welded steel, with black powder coating. Length is 60 cm (23.5 inches), which is a good size: not too long to become cumbersome, but long enough to get decent leverage. Despite its size and strength (this baby is seriously strong), weight is only 750 g (1.65 lb), so you don’t have to struggle with the weight of the tool while using it.

    The hook and cleat are mounted at just the right position to engage the verticals, and the steel edges of the hook are nicely rounded so the hook does not damage the rope. The cleat is attached with locknuts, so it won’t loosen over time.

    I built both a djembe and a kenkeni using this bar, and it got the job done quickly and efficiently. The rubber caps prevent damage to the drum and make it much less likely for the bar to slip as you apply tension.

    My only slight gripe is the nylon cleat (Clamcleat CL205), which doesn’t engage on the verticals quite as firmly as an aluminium cleat. Usually, this is an issue only with tightly-packed rope with little give, such as rope with a Spectra or Vectran core. With polyester rope, I had no problems getting the cleat to engage properly. Even so, after providing this feedback, I’m told that the release model will have a CL222 cleat, which is identical, but made of aluminium, so that’s no longer a concern. (The ridges on aluminium cleats engage better and don’t blunt as quickly.)

    Overall, this is a nice and well-designed tool. I won’t throw away my pulling stand just yet but, if you re-head drums only occasionally, this is worth having (and much cheaper and smaller than a pulling stand). And the bar works great for dunduns, which you can’t put on many models of pulling stand.

    In the interest of full disclosure, I didn’t get any payment or other incentive for writing this review. I just know the guys at African Drumming as a bunch of dedicated djembe enthusiasts, and when they asked me to try out their new bar, I said “sure, why not?” I’ve just sent the bar on to a drum maker in Townsville, who’ll be putting it through its paces next. Expect to see this bar pop up on the African Drumming website soon!

    Michi.”

    http://djembefola.com/board/instrument-building-and-repair-f3/tuning-bar-t5143.html

  2. Rated 4 out of 5

    admin

    As reviewed by Saul Smith

    “Last weekend we did a couple of sets of duns with good results. The tuning bar was a very helpful tool indeed and we gave it another good testing. We first used ratchets to get the skins pulled down evenly then went around with the tuning bar to pull some tension with the rope. We will be finishing off once dried. The tuning bar worked really well and was an efficient tool for what we needed to do. We did however find that the rubber stoppers on the end of the base came loose and would fall off in use. Could easily be fixed with a little glue. Also the cleat was good but would sometimes slip under a lot of pressure”.

Add a review